If you plan to sell a house, you need to ensure it’s in excellent condition to maximize profits. Potential homebuyers will want to know if they’re investing in the right property or not. They will even hire house inspectors to examine the house before buying.

Besides, doing the necessary repairs will increase your home’s value and even attract many potential homebuyers. The plumbing fixes are one of the most vital repairs to do before listing your house in the market. So, what are the things you have to fix first?

Plumbing Repairs to Do before Selling Your House

When buying homes, homeowners always ensure that the plumbing fixtures are in good shape. They don’t want to spend a lot of money on repairs after moving. Thankfully, you can opt for the plumbing Missoula services to fix any plumbing problem in your house.

Here are some of the plumbing fixes to do before selling your house.

1. Leaky Pipes

If undetected early, leaky pipes can cause irreversible damages to floors and furniture. The dampness will even encourage bugs such as cockroaches in the house. Most leaks usually occur at the pipe joints, especially when the pipe freezes and bursts.

When there’s a leak on the system’s supply side, water will escape under high pressure, causing devastating damages to the surrounding areas. It can even result in flooding if not repaired immediately. Make sure you fix all the leaking pipe joints.

2. Dripping Faucets

Did you know that you can lose hundreds of gallons of water a year in a single dripping faucet? You can imagine how much water and money you’ll waste when all the taps in your house are dripping. That’s why you need to fix it before selling your home.

Leaky faucets are a common problem in many households. If your faucets are dripping, the chances are high that your faucet cartridge or washer is worn out. The good news is that they are easy to repair. You don’t have to hire a professional plumber to do the job.

3. Clogged Shower or Bath Drain

Shower and bath drains can get clogged by soap and hairpieces. If not dealt with at the right time, the problem may worsen with time. To avoid the costly repair costs, employ preventive measures, like installing a drain guard to trap the hair and soap particles.

If there’s a clog in your bath or shower drain, you need to use a plunger to clear the blockage. Alternatively, you can use vinegar and baking soda to dissolve the clog. The simplest way to unclog the drain is by forcing a cable through the clog.

4. Slow-Draining Sinks

Your sinks will slowly drain if there are blockages in the sink drains restricting the flow of water. Some of the things that can block the drains of kitchen sinks are food remnants and congealed fats. In bathrooms, blockages can result from soap and hairpieces.

The good news is, clearing the sink drain blockages is very simple. You will need a plunger, vinegar, and baking soda. You can even use a chemical clog remover or a plumber’s snake. If you don’t tackle the issue early, the drain can block completely.

5. Clogged Toilets

Are your toilet bowls filling up and not draining away? That must be a sign of a clogged toilet drain pipe. In that case, you should clear the clogs using a plunger. But there are many other ways to unclog the toilet, including using hot water and baking soda.

If you don’t want to use a plunger to unclog the toilet, you can pour a mixture of vinegar and baking soda to dissolve the clogs. Let the solution stand overnight for good results. With these simple steps, you don’t have to hire a professional to do the work.

6. Reduced Water Pressure

If water trickles out of your taps instead of gushing, you need to monitor the water pressure. Low water pressure can result from leaking pipes that are broken, worn out, or corroded. It can also be due to sediment build-up on aerators.

So, how can you solve the low water pressure issue? Consider soaking the aerator in a solution of vinegar for a few hours to clean it. You can also soak the showerhead in vinegar. If the problem persists, you need to replace all the parts.

7. Sewer System Backups

Many things are so disgusting about sewer systems backups. They can be very nasty, smelly, inconvenient, and even costly to repair. How do you know that the sewer system has a blockage? Check if your toilets and drains are not working and have a terrible odour.

To fix a blocked sewer system, you need to consider the blockage’s location. If it occurs within your compound, you’ll have to incur the repair costs. But if the blockage occurs along the public road, contact your water company to clear up the mess.

8. Faulty Water Heaters

As one of the most essential appliances in a home, water heaters should always be fully operational unless you turn it off for some reason. You’ll know that your water heater is faulty when the water coming out from the shower suddenly gets cold.

Here are the other signs your water heater is faulty and the possible causes.

• Water heater making strange noises due to scale build-ups on heating elements

• Low hot water pressure due to sediments and calcium deposits in your plumbing

• Water taking too long to reheat due to thermostat and heating elements issues

vWater is too hot due to faulty thermostats

Generally, you’ll need a professional to repair the water heater issues. They will inspect, maintain, and repair your water heater.

Final Words

Now that you know all the plumbing fixes to do before selling your house, you can keep the house in great shape. To save on repair costs, you can do the simple repairs by yourself. You should only hire a professional when the repairs are too technical.